Durable Flat Sofa Zig Zag Springs , 3.6mm - 4.0mm Black Color With Antirust Treatment


Product Descriptions

Serpentine Upholstery Springs are manufactured in a continuous ‘S’ shape and sold either in specific cut lengths or a continuous length, where the user will cut the spring to a specific length dependent upon the application. The wire size used is normally standard 9 gauge spring steel wire (which equates to 0.148” or 3.76mm) for the seating application and 11 gauge (which equates to 0.120” or 3.05mm) for the backs and or arms.

Function of Serpentine Springs for Furniture

The function of Serpentine Spring used in furniture upholstery, is that the spring runs from front to back, or in the case of the backs from top to bottom, and is securely fastened (usually with a strong clip which is either nailed or screwed to a strong frame) at each end. The fixing of Serpentine Springs for furniture is important because you don’t want the fixing to drift or slip forward when the spring is put under tension, otherwise the cushion will sag after a very short period of time.

Measuring

When measuring the required length, it is important to only measure the distance across the area to be bridged with the Serpentine Spring, and not allow for any bowing of the spring which may or may not be required. This measurement will make the difference between the spring fitting perfectly, or sagging or lifting of the cushion. So it needs to be right.

Another factor when using serpentine upholstery springs is the distance between the springs themselves across the chair (or couch). If the gap is too wide, then the cushion will have a tendency to fall down the oversized gap. Conversely, if the gap is too small it may end up either being too strong with little or no ‘spring action’ in it, or simply be too hard to comfortably sit on. Usually a couple of inches gap, (or 50mm) is perfectly adequate. When measuring, please do not allow for the arc, the inside frame measurement is the size required.

Advantages Of Product

1. it's made of high carbon stell wire,has good elasticity and keep shape for more than 8 years.
2. Can be made with different wire diameter to fit for the different usage demands.
3. Passed the fatigue test,can reach exceed 20,000 times not out of shape.
4. Antirust treatment,surface of the spring was processed with the enviromental paint.
5. Mostly be used in sofa seat and back.

Application

Flat zigzag spring is straight shape.It's mostly used in chairs and car seat.
Product Details

Trade Term & Payment Term


1. We only accept the trade term are EX-WORK,FOB Guangzhou / Shenzhen or CIF / CNF
2. As regards the payment term,if trade in EXW,goods will be loaded in factory or if you need us send the goods to appointed loading place,it's also ok,but maybe will have extra fee.​If trade in FOB / CIF term,goods will be shipped from Guangzhou / Shenzhen port.

Why Choose Us

1. Quality guarantee
2. Good price and best service
3. One-stop solution
4. 24 hours online and fast reply
5. Fast delivery time

Product Photo

After past few years developments,our factory building area has reached 10,000 square meter,we have more than 5 technicians with many years' experience in this field.Using imported equipments in processing,the annual output reaches 8,000 tons,products quality in a leading position of the industry.'Choosing' brand mainly includes:sofa zigzag spring,coil spring,cushion pocket spring and relevant accessories of software furniture.So far,Ju Xing has had strong ability of customized,supply customers with a variety of customized sofa spring and service,to meet different needs.

Ju Xing believes the innovation is the most important source of improvement and the basic of competitive force.We will keep investing on new products to ensure the leading position in the market,create greater value for customers to achieve a win-win situation.